5.3. Deploying Iroha

Hyperledger Iroha can be deployed in different ways, depending on the perspective and the purpose. There can be either a single node deployed, or multiple nodes running in several containers on a local machine or spread across the network — so pick any case you need. This page describes different scenarios and is intended to act as a how-to guide for users, primarily trying out Iroha for the first time.

5.3.1. Running single instance

Generally, people want to run Iroha locally in order to try out the API and explore the capabilities. This can be done in local or container environment (Docker). We will explore both possible cases, but in order to simplify peer components deployment, it is advised to have Docker installed on your machine. Local environment

By local environment, it is meant to have daemon process and Postgres deployed without any containers. This might be helpful in cases when messing up with Docker is not preferred — generally a quick exploration of the features. Run postgres server

In order to run postgres server locally, you should check postgres website and follow their description. Generally, postgres server runs automatically when the system starts, but this should be checked in the configuration of the system. Run iroha daemon (irohad)

There is a list of preconditions which you should meet before proceeding:

  • Postgres server is up and running
  • irohad Iroha daemon binary is built and accessible in your system
  • The genesis block and configuration files were created
  • Config file uses valid postgres connection settings
  • A keypair for the peer is generated
  • This is the first time you run the Iroha on this peer and you want to create new chain


Have you got something that is not the same as in the list of assumptions? Please, refer to the section below the document, titled as Dealing with troubles.

In case of valid assumptions, the only thing that remains is to launch the daemon process with following parameters:

Paramètre Meaning
config configuration file, containing postgres connection and values to tune the system
genesis_block initial block in the ledger
keypair_name private and public key file names without file extension, used by peer to sign the blocks


Specifying a new genesis block using –genesis_block with blocks already present in ledger requires –overwrite_ledger flag to be set. The daemon will fail otherwise.

An example of shell command, running Iroha daemon is

irohad --config example/config.sample --genesis_block example/genesis.block --keypair_name example/node0


If you have stopped the daemon and want to use existing chain — you should not pass the genesis block parameter. Docker

In order to run Iroha peer as a single instance in Docker, you should pull the image for Iroha first:

docker pull hyperledger/iroha:latest


Use latest tag for latest stable release, and develop for latest development version

Then, you have to create an enviroment for the image to run without problems: Create docker network

Containers for Postgres and Iroha should run in the same virtual network, in order to be available to each other. Create a network, by typing following command (you can use any name for the network, but in the example, we use iroha-network name):

docker network create iroha-network Run Postgresql in a container

Similarly, run postgres server, attaching it to the network you have created before, and exposing ports for communication:

docker run --name some-postgres \
-e POSTGRES_USER=postgres \
-e POSTGRES_PASSWORD=mysecretpassword \
-p 5432:5432 \
--network=iroha-network \
-d postgres:9.5 Create volume for block storage

Before we run iroha daemon in the container, we should create persistent volume to store files, storing blocks for the chain. It is done via the following command:

docker volume create blockstore Running iroha daemon in docker container

There is a list of assumptions which you should review before proceeding:
  • Postgres server is running on the same docker network
  • There is a folder, containing config file and keypair for a single node
  • This is the first time you run the Iroha on this peer and you want to create new chain

If they are met, you can move forward with the following command:

docker run --name iroha \
# External port
-p 50051:50051 \
# Folder with configuration files
-v ~/Developer/iroha/example:/opt/iroha_data \
# Blockstore volume
-v blockstore:/tmp/block_store \
# Postgres settings
-e POSTGRES_HOST='some-postgres' \
-e POSTGRES_PORT='5432' \
-e POSTGRES_PASSWORD='mysecretpassword' \
-e POSTGRES_USER='postgres' \
# Node keypair name
-e KEY='node0' \
# Docker network name
--network=iroha-network \

5.3.2. Running multiple instances (peer network)

In order to set up a peer network, one should follow routines, described in this section. In this version, we support manual deployment and automated by Ansible Playbook. Choose an option, that meets your security criteria and other needs. Manuellement

By manual deployment, we mean that Iroha peer network is set up without automated assistance. It is similar to the process of running a single local instance, although the difference is the genesis block includes more than a single peer. In order to form a block, which includes more than a single peer, or requires customization for your needs, please take a look at Dealing with troubles section. Automatisé

5.3.3. Dealing with troubles

— »Please, help me, because I… » Do not have Iroha daemon binary

You can build Iroha daemon binary from sources. You can get binaries here Do not have a config file

Check how to create a configuration file by following this link Do not have a genesis block

Create genesis block by generating it via iroha-cli or manually, using the example and checking out permissions Do not have a keypair for a peer

In order to create a keypair for an account or a peer, use iroha-cli binary by passing the name of the peer with –new_account option. For example:

./iroha-cli --account_name newuser@test --new_account